August 2015 - CARLO GAVAZZI is pleased to announce two new product lines designed specifically for harsh environments.
The new ICS Inductive Proximity Sensors meet or exceed IP69K, ECOLAB, and FDA standards. The new CONB Series Cordsets meet or
exceed IP69K and ECOLAB standards. Both the ICS Sensors and the CONB Cordsets are perfect for environments where high pressure sprays,
high temperatures, or harsh chemicals are present.
The ICS Series sensors are the ideal solution for harsh environments such as those found in the Food and Beverage, Mobile Equipment, Chemical, Pharmaceutical, Renewable Energy and Agricultural industries.
By pairing the ICS Series or any IP69K rated sensors with the new CONB Series cordsets, a complete solution is available for the Food and Beverage industry, or any harsh environment application.
The CONB Series cordsets are the perfect complement to any IP69K rated sensor, including inductive, photoelectric, and capacitive sensors offered from Carlo Gavazzi.
Technical Specifications Include:
ICS Series Sensors
•Three-wire DC wiring configuration
•Available in M12, M18, and M30 housings
•All housings are 316L stainless steel
•Single (2-15mm) or double (4-22mm) sensing distance
•Flush or non-flush mounting
•Long barrel housings (short barrel also available for M30 housings)
•Normally open or normally closed outputs
•200mA PNP or NPN transistor output
CONB Series Cordsets
•Cable length of 2 meters or 5 meters
•Straight or 90° angle connector
•Non-illuminated or LED versions
Key Features Include:
ICS Series Sensors
•IP69K ensures the sensor and cordset will withstand high pressure and high temperature cleaning processes
•ECOLAB certification ensures resistance to many harsh acids, alkalines, aggressive chemicals, cleaning agents and disinfectants
•FDA compliance assures that ICS Series sensors are made of materials approved for use in the food industry
•Wide operating range of -40°C to +80°C ( -40°F to +176°F) easily accommodates both hot and cold temperature extremes
•Will work reliably for up to 15 minutes in boiling water (100°C / 212°F) - thus accommodating cleaning process requirements
•True microprocessor-based technology allows final calibration after the assembly, enabling greater temperature stability, reliability, and repeatability
•The ability to re-program the microprocessor opens up opportunities to customize the sensor to specific OEM requests, such as special output types, switching frequencies, and timing functions
•Clearly visible diagnostic LEDs are easily viewed from any direction, and provide sensor status, set-up assistance, as well as short circuit or overload indication
•With up to 2,000 Hz operating frequency, the new ICS Series is one of the fastest inductive proximity sensors available on the market, making it the perfect choice for high speed counting and rotational speed monitoring
•Permanently legible, laser-engraved part number, cULus / CE marks, and serial number are readily visible on the sensor housing
•All sensors are cULus listed and CE marked
CONB Series Cordsets
•All CONB Series cordsets are IP69K rated, and ECOLAB and UL certified
•Wide operating range from -40°C to 105°C ( -40°F to 221°F), one of the highest temperature ratings in the market
•Orange Thermoplastic elastomer cable for clear visibility of dirt accumulation
•Stainless Steel locking nut to resist corrosion
